– Getting Started & Next Steps
Whether you employ your garage just for automobile storage or as a workshop area, it is important to shield the concrete flooring against deterioration. Left unprotected, garage flooring can rapidly decompose due to things like oil and chemical spills, tire imprints, and general wear and tear over time. One of the finest approaches to defend and beautify a garage floor is by using an epoxy or polyaspartic protective layer.
1 Picture Gallery: – Getting Started & Next Steps
Garage Force is a renowned brand that manufactures high-quality protective coatings specifically formulated for garage flooring. After assessing dozens of Garage Force reviews found on the internet, a few products stood apart as top performers for shielding and enhancing the appearance of any garage flooring:
The Garage Force Epoxy Protective Layer Kit is a two-component 100% solids epoxy system that offers a durable, chemical-resistant, and aesthetically-pleasing finish. The low-odor epoxy dries rapidly to form a hard, glossy surface that resists stains, abrasions, and impacts. It’s suitable for both residential and commercial uses. Installation is straightforward with the kit’s step-by-step instructions.
For faster-drying protection, consider the Garage Force Polyaspartic Coating. This single-component protective layer cures within 2-4 hours, allowing you to use your garage sooner than with traditional epoxy. It also offers superior UV resistance and color retention compared to other polyaspartic garage floor coating on the market. The non-yellowing formula maintains a bright, glossy look for years.
Whichever garage floor coating you select, appropriate surface preparation is key for long-lasting results. Sweep and vacuum to remove all loose debris. Then etch or grind the concrete to create texture for better adhesion. This is especially important for older floors with existing garage floor coating or sealants. After etching, thoroughly clean the floor to remove all residue and allow it to fully dry before application.
For application, both the Garage Force epoxy and polyaspartic protective layers include detailed directions. Generally, you’ll want to pour the resin element onto the flooring in ribbons and spread it uniformly with a notched squeegee. Back-roll the material with a non-shedding roller to work it into all the pores and crevices of the concrete.
Be sure to apply the Garage Force garage floor coating within the appropriate temperature range, usually between 50-90F. Too cold or hot and it won’t cure properly. Also work in sections you can coat within the pot life window before material starts to set up. An extra set of helping hands makes application go much smoother. Allow full cure times of 12-24 hours before moving vehicles or equipment back in.
With the appropriate Garage Force garage floor coating, you’ll appreciate a glossy, stain-resistant surface that’s simple to clean. No more unsightly oil stains or tire marks damaging the concrete. The non-slip texture offers traction too. Periodic sweeping is generally all that’s necessary to maintain the like-new visual appeal for many years. Recoat only when the protective layer wears thin rather than stripping and starting over again.
This post topic: Advertising & Marketing
